Welcome.
My very long story about learning ZwCad Architecture 2012+, teaching users
of Zwcad is written in this topic
http://forum.cad.info.pl/topic/815-co-warto-udoskonali%C4%87-w-zwcad-architecture/
This topic "How improve ZWCAD ARCHITECTURE 2012+" is in polish language. It
is written in posts ("blog form") from 11 June 2013, where I show problems
(errors), proposals of new functions, some tip/tricks.
This topic shows also architectural drawing rules in POLAND (EU)and how
to use ZWCAD ARCHITECTURE ( VERNUM = "2013.03.19(10973)") to draw according
to this rules.
I do tests since 12 September 2013 ZWCad Architecture 2014+ Beta Eng
VERNUM = "2013.09.03(15493)"
http://forum.cad.info.pl/
I Invite You here:
http://forum.cad.info.pl/topic/815-co-warto-udoskonali%C4%87-w-zwcad-architecture/
Please enjoy :) Short english version of polish topic is here:
http://www.zwsoft.com/forum/thread-2972-1-1.html
some examples pictures from blog:
Attention, next proposals, practical using
etc. are continued here ,too.
https://twitter.com/MaverS_71
1. Cad problem with Roof and solving it
Align Wall to Roof generates error of top surface of wall which is not parallel
to bottom surface of Roof, some tips/trick allow avoid this CAD problem.
Solving
of CAD error. The Top Surface of Wall and The Bottom Surface Roof are
parallel:
my Example shows step by step properly displayed final effect of Aligned Wall to Roof.
Example. We draw rectangle exterior Walls 250mm with insulation 150mm, Hight = 3000mm
We draw Double Slope Roof 30deg. set with parameter Elevation = 3000mm, too.
1. Moove inside 2 Gable Walls 500mm.
2. Use command Align Wall to Roof
3. Moove outside 2 Gable Walls 500mm.
Top surfaces of Gable Walls are parallel to bottom surfaces of Roof
4. Some correction of point No.3 ..down
Example. We draw rectangle exterior Walls 250mm with insulation 150mm, Hight = 3000mm
We draw Double Slope Roof 30deg. set with parameter Elevation = 3000mm, too.
1. Moove inside 2 Gable Walls 500mm.
2. Use command Align Wall to Roof
3. Moove outside 2 Gable Walls 500mm.
Top surfaces of Gable Walls are parallel to bottom surfaces of Roof
4. Some correction of point No.3 ..down
F.E. Final effect:
3. New funcionality: UNIVERSAL_3D_BIM_PROFILE for ZWCAD ARCHITECTURE 2015+???
4. Tip/trick of CORNICE ROOF GENERATOR for ZWCAD ARCHITECTURE 2015+???
6. Tip/Trick of CHIMNEY GENERATOR
8. Elevation label for polish standard of drawing example (polish standard – openned arrow)
9. New future functionality
3 types of ending of Roof should depend for User choice. It depends on slope angle of Roof. For test Thickness is constans = 200mm (wood beam), Slab Thickness = 200mm/cos(Slope) Propositions endings for ZWCAD Architecture 2015+???
12. MULTI-LAYER WALLS,
which may be similar to mechanism CAD for Wall EXTERIOR.
In medium/cold climat Architects need sometimes MULTI-LAYER WALLS example:
Silica Bric 250mm + Insulation 120mm + Air Ventilation 40mm +
+ Silica Bric_120mm/Clinker Bric_120mm graphic example:
13. No WOOD material for structures
Now We have 4 options: (0) No material (1) Reinforced concrete (2) Brick (3) Metal Why There is not WOOD (4) !!! If We use for traditional structure of building Bricks, reinforcement and Wood ....We may use steel by changing steel pattern to wood pattern step by step:
14. Practical examples using of ZWCAD ARCH+2014
for Structural Engineering (Reinforcement):
15. PDF3D by ARTISAN in Future?
.... long long story will be continued in future here
http://www.zwsoft.com/forum/thread-2972-1-1.html
in POLAND (EU) here (to see pictures needed registration in Polish forum):
http://forum.cad.info.pl/topic/815-co-warto-udoskonali%C4%87-w-zwcad-architecture/page-5
Attention, next proposals,
practical using etc. are continued here ,too.
https://twitter.com/MaverS_71
MaverS_71 (Martin_S)
